DIY In-slab Floor Heating Kits
In-slab DIY Cable kits
In-slab DIY cable kits are ideal for installation in large areas within a concrete slab or polished slab floor.
The cable is tied down to the reinforcing mesh prior to the concrete being poured.
Typical room coverage, allowing for a gap around the edge of the room is about 80% of the actual floor area.
Suited to systems using off-peak power, in-slab heating is a cost effective floor heating solution.
Free delivery within NSW
In-slab cable kit inclusions
Standard Touch Screen Thermostat
For a small additional cost, you can swap out the above standard thermostat for one of the options below.
Glass Front ThermostatGTSW-TH-V
Or purchase separately for $216 incl GST
Suitable for lighting, fans & heated towel rails
Programming instructions for GTSW-TH-V thermostat
Dual Thermostat / Timer TS8100W-TH/TIM-DUAL-V
Or purchase separately for $188 incl GST
2 in 1 Timer for your heated towel rail and control for your under floor heating
Programming instructions TS8100W-TH/TIM-DUAL-V therm / timer
DIN Rail ThermostatETV-1191
Or purchase separately for $185 incl GST
Suitable for home automation when remote control of the system is required
Specifications for ETV-1191 thermostat
Choose your kit size
For installation within a concrete slab - 30 watts per linear metre, twin core cable.
Prices for cable only - add $175 for a thermostat
All prices include GST
Max output watts
Cable length metres
Heated floor area @150w per sqm cable spacing 20cm